How much feed does a horse need?

If you are asking how much feed does a horse need, the useful answer is not a scoop size — it is a small piece of arithmetic built on forage. A horse eats forage at roughly 1.5–2.5% of its body weight in dry matter every day, and whether that forage is enough on its own depends on how hard the horse works. This guide works through the published NRC (2007) requirements step by step: the energy and protein a horse needs at each workload, how much forage that means for horses of different sizes, what hay quality does to the sums, and the point at which concentrate genuinely earns its place in the ration. To skip straight to your own horse's numbers, use our horse feed calculator — it applies exactly the method below.

Horses eating hay outdoors — forage makes up most of a horse's daily feed ration
Not veterinary advice. This guide applies the published NRC (2007) estimates described on our methodology page. It cannot assess your horse. Feeding decisions — and any worry about weight, condition or health — belong with your veterinarian or equine nutritionist.

The short answer: forage first, at 1.5–2.5% of body weight

Start every ration with forage — hay, haylage or grazing — because the horse's digestive system is built around a near-constant flow of fibre. The established feeding range is 1.5–2.5% of body weight in forage dry matter per day, and 2.0% is the maintenance baseline most rations are built from. For a 500 kg horse that baseline is 10 kg of dry matter a day. Dry matter means the feed with its water removed, which is why the amount you actually weigh out — the as-fed amount — is always higher: at a typical 88% dry matter, 10 kg of dry matter is about 11.4 kg of baled hay on the yard scale.

Two boundaries matter more than the exact figure inside the range. First, never drop forage below 1.5% of body weight without veterinary guidance: forage keeps the hindgut working, and a horse that needs to lose weight should lose concentrate and move to lower-energy hay first, not lose its fibre. Second, forage quantity alone does not settle the ration — you also have to check what the forage delivers against what the horse's workload requires. That check is an energy sum, and it is where most feeding mistakes happen: owners weigh out a plausible-looking amount of hay and never discover that a horse in hard work is quietly running short, or that a resting horse is being fed well past its needs. The Alabama Cooperative Extension System's guide to decreasing the costs of feeding horses sets out the same NRC-based requirements and the same 1.5–2.5% dry-matter intake range, and it is a good plain-language companion to this guide.

Energy needs by workload: the NRC table

The reference behind every figure in this guide is Nutrient Requirements of Horses (National Research Council, 2007). It expresses a horse's daily needs as two numbers that scale with body weight and workload: digestible energy (DE), in megacalories (Mcal) per day, and crude protein (CP), in grams per day. Digestible energy is the share of a feed's energy the horse can actually absorb, and it is the currency a ration is balanced in: each workload carries a DE requirement per kilogram of body weight, each feed carries a DE density, and feeding well means matching the two. The table below applies the NRC coefficients to one 500 kg horse, so you can see what workload alone does to the requirement.

WorkloadDE (Mcal/kg)DE for 500 kgCP (g/kg)CP for 500 kg
Maintenance0.033316.7 Mcal/day1.26630 g/day
Light work0.040020.0 Mcal/day1.40700 g/day
Moderate work0.046623.3 Mcal/day1.54770 g/day
Heavy work0.053226.6 Mcal/day1.72860 g/day
Very heavy work0.063231.6 Mcal/day2.011,005 g/day
Maintenance16.7 Mcal
Light work20.0 Mcal
Moderate work23.3 Mcal
Heavy work26.6 Mcal
Very heavy work31.6 Mcal
Daily digestible energy requirement of a 500 kg horse by workload (NRC, 2007).

Workload is the lever most owners underestimate. For that one 500 kg horse, maintenance to moderate work adds about 6.6 Mcal a day — roughly 3 kg of grass hay's energy — and very heavy work nearly doubles the resting figure, from 16.7 to 31.6 Mcal. Nothing about the horse has changed except the work it is doing, yet the ration that suited it at rest would leave it badly short in hard work. This is also why there is no honest universal answer to “how many kilos of feed?” without asking what the horse does: the same horse, correctly fed, can legitimately need very different amounts in different months of its working year.

Protein: the second number, briefly

Protein rises alongside energy, on its own NRC coefficients: 1.26 g of crude protein per kilogram of body weight at maintenance, rising through 1.40, 1.54 and 1.72 g to 2.01 g in very heavy work. For the 500 kg horse in the table, that is 630 g a day at maintenance and just over 1,000 g — 1,005 g — in very heavy work. Protein is what the horse builds and repairs tissue with, and work increases the turnover, which is why the requirement climbs with the workload rather than staying flat.

In practice, protein is rarely the number that breaks a forage-based ration first — energy usually runs short before protein does, which is why this guide and our calculator lead with the energy sum and report protein alongside it. But “rarely first” is not “never”: a ration built from poor forage can miss on both, and the only way to know what your own hay supplies is a hay analysis. Treat the protein column as a check to run, not a worry to carry — and if your horse is losing muscle or condition on a ration that meets its energy needs, that is a conversation for your veterinarian or an equine nutritionist, not for guesswork with supplements.

Horses feeding on hay in a pasture — hay quality changes how much feed a horse needs

Forage amounts for real horses: 400, 500 and 600 kg

Percentages become feed-room numbers when you apply them to an actual horse. At the 2.0% maintenance baseline, forage dry matter is simply body weight multiplied by 0.02 — and the as-fed column converts that into the hay you would actually weigh out at a typical 88% dry matter, by dividing by 0.88. If you do not know your horse's weight, our horse weight calculator estimates it from heart-girth and body length measurements, and passes the estimate straight into the feed calculator.

400 kg horse — forage at 2.0% of body weight8.0 kg dry matter · ≈ 9.1 kg hay as-fed
500 kg horse — forage at 2.0% of body weight10.0 kg dry matter · ≈ 11.4 kg hay as-fed
600 kg horse — forage at 2.0% of body weight12.0 kg dry matter · ≈ 13.6 kg hay as-fed

Read those figures as the centre of the 1.5–2.5% range, not as fixed rations. The same 500 kg horse could correctly sit anywhere from 7.5 kg of dry matter at the 1.5% floor to 12.5 kg at 2.5%, depending on its workload, its condition and the energy in the forage itself — the next two sections are about exactly those adjustments. What the table does give you is a scale check: if you are weighing out dramatically less than the as-fed figure for your horse's size, the ration needs a second look, and if you are far above it for a horse at rest, so does the feed bill. Once you have a daily figure you trust, our hay calculator turns it into bales per month and per winter, so you can order and budget ahead instead of discovering a shortfall mid-season.

Hay quality: why the same weight of hay is not the same feed

Everything so far has treated hay as if a kilogram were a kilogram. It is not. Hays differ in energy density, and the difference decides whether a forage ration meets the requirement or quietly misses it. The University of Nebraska–Lincoln Extension's feeding basics for horses (G1875) publishes energy values for common hays, including two worth holding in mind: cool-season grass hay at mid-maturity carries 0.99 Mcal per pound of dry matter — about 2.18 Mcal per kilogram — while mid-mature alfalfa carries 1.1 Mcal per pound, about 2.43 Mcal per kilogram. Same scale weight, meaningfully different energy: the alfalfa delivers more in every kilogram, which is why legume hay is the traditional lever for horses that need more from their forage, and why grass hay suits horses that need less.

Maturity is the other half of quality: as a forage plant matures, its energy density falls, so two bales of the same grass cut at different stages are different feeds wearing the same name. This is the honest limit of any guide, including this one — we can give you the published values for typical hays, but your hay is a specific crop from a specific field. A hay analysis replaces the typical value with your value, and for a horse whose ration is tight — hard work, poor condition, a medical history — it is money well spent. Until then, work with the published figures, watch the horse in front of you, and adjust in small steps.

When concentrate is needed: the worked example

Concentrate — grain or a manufactured feed — has one job in this method: closing an energy gap that forage cannot close. Horses at maintenance or in light work commonly have no gap at all, and for them concentrate is unneeded calories; a forage ration plus a balancer to cover the mineral and vitamin side is the appropriate shape. The gap appears as work rises. Take the worked example our calculator is built on: a 500 kg horse in moderate work. Its DE requirement is 500 × 0.0466 = 23.3 Mcal a day, and its protein requirement is 500 × 1.54 = 770 g. At the 2.0% forage baseline it gets 10.0 kg of dry matter — 11.4 kg of hay as-fed at 88% dry matter. Typical grass hay at 2.0 Mcal per kilogram of dry matter supplies 10 × 2.0 = 20.0 Mcal from that forage. The horse needs 23.3 and the forage gives 20.0, leaving a 3.3 Mcal gap — and a typical concentrate at 3.0 Mcal per kilogram closes it at 3.3 ÷ 3.0 = 1.1 kg a day.

Body weight500 kg
WorkloadModerate work
Digestible energy needed (500 × 0.0466)23.3 Mcal/day
Crude protein needed (500 × 1.54)770 g/day
Forage at 2.0% of body weight (dry matter)10.0 kg/day
Hay as-fed (÷ 0.88 dry matter)11.4 kg/day
Energy from that hay (10 × 2.0)20.0 Mcal/day
Energy gap (23.3 − 20.0)3.3 Mcal/day
Concentrate needed (3.3 ÷ 3.0)1.1 kg/day

Notice what the example does not do: it does not start from a bag label's suggested scoop, and it does not feed concentrate “because the horse works”. It feeds exactly the shortfall, no more. Feeding past the gap does not buy performance — it buys weight gain and a bigger feed bill, and feed is a real line in the total cost of owning a horse, which our cost hub lays out in full. If your horse's gap is zero, the correct amount of concentrate is zero, whatever the bag says.

Feeding rules that protect the ration

A correct ration fed badly can still cause trouble, so the method comes with handling rules. These are standard general practice, not a substitute for advice about your own horse.

What this guide does not cover

The NRC covers far more than energy and protein, and this guide stops where its sources stop. It does not work through minerals or vitamins in detail — calcium, phosphorus, selenium, vitamin E and the rest — which is why a forage-only ration still needs a balancer or supplement chosen for the forage and the region. It makes no life-stage adjustments: growing horses and pregnant or lactating mares differ materially from the adult maintenance-and-work coefficients used here. And it cannot see your horse. Condition, teeth, climate and individual metabolism all shift the real requirement away from any published table, and medical conditions can change what a horse should be fed at all, not just how much. Treat this guide as a starting ration: reweigh and condition-score every few weeks, adjust in small steps, and build anything beyond the standard case with your veterinarian or a qualified equine nutritionist.

How our calculator applies the NRC figures

Our horse feed calculator runs this guide's arithmetic on your own inputs. You give it a body weight and a workload; it multiplies the weight by the workload's NRC coefficients to get the DE and CP requirements, builds the ration forage-first — 2.0% of body weight up to moderate work, 2.5% for heavy and very heavy work — converts forage dry matter into hay as-fed, and divides any remaining energy gap by the concentrate's energy density. Its quick mode uses the worked example's assumptions — grass hay at 2.0 Mcal/kg and 88% dry matter, concentrate at 3.0 Mcal/kg — and its advanced mode lets you substitute your own hay analysis and feed figures. Every coefficient and source is published on our methodology page, because a number you cannot trace is a number you should not feed by.

Horse feed questions

How much feed does a horse need per day?

Start with forage: 1.5–2.5% of body weight in forage dry matter daily — 7.5–12.5 kg for a 500 kg horse, roughly 8.5–14.2 kg of baled hay as-fed. Energy depends on workload: 16.7 Mcal a day at maintenance, 23.3 Mcal in moderate work for that horse. Our feed calculator turns your horse's weight and workload into exact figures.

How much hay is 2% of body weight?

For a 500 kg horse, 2% of body weight is 10 kg of forage dry matter. At a typical 88% dry matter, divide by 0.88: about 11.4 kg as-fed per day. For 400 kg, the figures are 8 kg and about 9.1 kg; for 600 kg, 12 kg and about 13.6 kg.

Does my horse need grain or concentrate?

Only if forage cannot meet the energy need. Horses at maintenance or in light work thrive on forage plus a balancer, with no grain. In harder work, hay alone leaves a gap; the calculator shows it and the concentrate that closes it. A zero gap means grain is unneeded calories.

What is digestible energy?

Digestible energy (DE) is the share of a feed's energy the horse can absorb, measured in megacalories (Mcal). It is the NRC (2007) energy currency: each workload carries a DE requirement per kilogram of body weight, each feed a DE density, and a ration matches the two.

Why does workload change the amount of feed so much?

Because the requirement itself scales with work. The NRC (2007) coefficient rises from 0.0333 Mcal per kilogram of body weight at maintenance to 0.0632 in very heavy work, so a 500 kg horse goes from 16.7 Mcal a day at rest to 31.6 Mcal — nearly double — and its protein need rises from 630 g to 1,005 g over the same range.

Can I use this guide for a pregnant or growing horse?

No — not to set the ration. Pregnancy, lactation and growth change the requirements substantially, adding needs this guide does not model; its coefficients cover adult horses at maintenance and in work. Have those rations set by your veterinarian or a qualified equine nutritionist.

Run your own numbers: the horse feed calculator applies this guide's NRC method to your horse's weight and workload — forage dry matter, hay as-fed and the concentrate that closes any gap, free, in your browser.